Drew-technologies CarDAQ-Plus User Manual download pdf (Page 4)

Introduction

Thank you for choosing CarDAQ-Plus! You now have the most complete

J2534 Pass-Thru device available for technicians today. The CarDAQ-

Plus will allow you to re-flash modern vehicle controllers to stock as

well as perform dealer level diagnostics on select manufacturer’s

vehicles.

This Quick Start Guide covers the initial setup, features, and common

questions. This manual is always available at www.drewtech.com.

Information for individual manufacturers can be found in the J2534

Toolbox application.

Getting to Know CarDAQ-Plus

Your package includes: the CarDAQ-Plus interface, a crossover Ethernet

cable, a USB cable, an OBD-II cable, and a installation CD that includes

PC drivers and the J2534 Toolbox.

Powering CarDAQ-Plus

The CarDAQ-Plus receives power from a vehicle OBDII port. When CarDAQ-Plus

is powered-on, the lights will cycle through a self-test procedure. The CarDAQ-

Plus does not receive power from your PC’s Ethernet or USB ports. Do not

connect the CarDAQ-Plus to your PC until you have installed the software below.

Setting up the CarDAQ-Plus

Do not connect the CarDAQ-Plus to your PC until you have

installed the software below.

Installing the CarDAQ-Plus Software to your PC

1. Insert the CD that came with your CarDAQ-Plus into the CD/DVD slot of

your PC. Make sure your CarDAQ-Plus is not connected to the PC at this

point. The Autoplay options will appear:

2. Click on [Run setup.exe] to begin the installation.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Drew-technologies CarDAQ-Plus User Manual Page 4